How to install the photovoltaic support system to achieve maximum power generation

Photovoltaic brackets support the operation of the entire photovoltaic power station and are one of the core parts of the photovoltaic power station. If they are not installed correctly, they may age prematurely and generate less power than expected; in serious cases, they may cause the photovoltaic power station to collapse, making its lifespan far shorter than expected.

1. Avoid occlusion when designing layout

The shadows caused by plants, corners, terrain, soil, dust, bird droppings, etc. should be fully considered in the design. The shadows in all directions of the photovoltaic modules should also be considered due to the height difference between each row.

2. Avoid incorrect installation

During the installation of the photovoltaic support system, the following problems often occur. First, due to inaccurate measurement results, the manual installation height deviates greatly from the design; second, the bolt tightness exceeds the requirement, which will damage the anti-corrosion coating on the surface of the product. Over time, the corrosion problem caused will cause power station failure. In response to these problems, Baowei New Energy has summarized a set of effective solutions based on years of experience, and can provide installation guidance for owners to reduce the impact of incorrect installation.

3. Avoid weathering and corrosion of foundation piles

Since many photovoltaic power stations are located in saline-alkali environments, if the foundation quality of the power station is poor, the concrete foundation is prone to premature weathering in winter. At the same time, if the galvanizing quality of the product is poor, bubbles or zinc edges will appear, resulting in corrosion problems.

solution:Photovoltaic bracket components can be hot-dip galvanized or steel spiral piles, as well as double flat washers and spring washers. Secondly, choose manufacturers of well-known photovoltaic bracket brands such as Baowei New Energy; and pay attention to the quality of hot-dip galvanizing and concrete construction quality; in saline-alkali environments, waterproof asphalt brush foundation surface and other measures can be used.